 |
|
Remote controls
4 remote controls available:
- The 2 functions TLC.
- The 5 TLC: 2 Functions, 2 Indicators, Increase/Decrease of the programs and displays.
- The onboard TLC.
- The remote display RC5. |
| |
|
|
 |
|
5 Series interface / Series 3 and alphanumeric...
Enables the instantaneous swapping of a 3 series instrument with a new generation 5 series instrument whilst conserving the same connections as far as the PLC is concerned.
3 interfaces are available:
F5/F3 - F580/F3 - F580/F alphanumeric |
| |
|
|
 |
|
Inputs / Outputs module
For the remote management of measurement units (heads) when long lenghts of cables seperate the measurement units from the central.
Enables the minimisation of the lengths of cable used between the elements.
Management of 3 units max. |
| |
|
|
 |
|
Parameter storage / result modules
Two seperate modules which enable the transfer of settings from one instrument to another and the recovery of the measurement results for software based assessment. |
| |
|
|
 |
|
Y Valve and Mini Y Valve
The Y valves and mini Y valves are 3/2 spring recoil valves with pneumatic or electric control.
They offer a high level of protection against leaks. |
| |
|
|
 |
|
CDF: Leak / Flow calibrator
The leak / flow calibrator allows the checking of the calibration of leak and flow measurement instruments, as well as calibrated leaks and jets.
This portable, compact and user friendly instrument is essential for checking the accuracy and repeatability of all leak and flow testers. |
| |
|
|
 |
|
2 pneumatic outputs
The optional pneumatic outputs (internal or external) are Two pneumatic pulses that are being activated at anytime during the cycle and under pre-set conditions such as: Start of cycle; end of cycle; Good part; Bad part;. . . Etc. They allow the user to operate simple jigs without having to rely on a PLC. |
| |
|
|
 |
|
Electronic regulators
Thanks to electronic regulators, an instrument can be programmed with a different pressure on each test cycle.
It can also be used as a pre-fill pressure to speed up the cycle time. |
| |
|
|
 |
|
Calibrated Leak / Jet
The calibrated leak or jet allows the checking of the calibration of leak or flow measuring instruments. Available in standard and customised versions, they simulate an exact leak or flow rate inside the test circuit to check that the instrument detects the right value. |
| |
|
|
 |
|
Quick sealing connectors
The quick sealing connectors pneumatically compress a soft ruber cylinder around an internal or external diameter.
Together with the optional pneumatic outputs of ATEQ' instruments, these devices offer a perfect solution to build fixtures quickly and inexpensively.
|
| |
|
|
 |
|
Filtration kit
ATEQ instrument require a clean and dry operation to remain reliable.
The Ethafilter ensures that the ATEQ operates under the ISO 8573-1 standard. |
| |
|
|
 |
|
Winateq
Winateq is an integrated software which is compatible with our custom windows based applications.
It is easy to install and includes a system configuration back up.
It can also be used as a base to develop customised applications. (Import and export function to spread sheet application).
|
| |
|
|
 |
|
Thermal printer
Connected to the RS 232 port of ATEQ's instruments, this thermal printer can print results in ASCII format, including the details of the cycle time and results.
Very handy in laboratory operation to automatically print dozens or hundreds of results. |
